Monday, July 31, 2017

Energy-efficient cleaning robot



State-of-the-art solar cells (for example: GOAL ZERO NOMAD 20 ) are efficient -- but are even more so when they are kept clean. A cleaning robot developed by Norwegian researchers enables solar panels to deliver at full capacity.

At a solar energy farm just outside Budapest in Hungary, a cleaning robot is industriously getting on with today's task. Hundreds of square metres of solar panels are waiting to be cleaned -- as quickly and effectively as possible. And without the use of chemicals or any unwanted discharges to the natural environment. The robot is the result of a joint project between Norwegian researchers and the Hungarian company ProDSP Technology.

"It's a well known fact that solar panels work more efficiently when they're clean," says SINTEF researcher and Project Manager Martin Bellmann who, in his day-to-day work, develops what is known as sustainable energy technology. "But what's new here is that we've developed a robot to do the job. This means that the solar cells are cleaned both quickly and efficiently with as little as possible wear and tear or environmental impact," he says.

There's dirt and there's dirt

Cleaning solar cells using a robot may sound like a straightforward job -- but there's dirt and there's dirt. And when a solar farm covering several square kilometres is being cleaned, no chemicals can be used, and there must be no damage to the natural environment. So how do we get to grips with a challenge like this?

Solar cell researcher Birgit Ryningen is examining a set of glass plates in SINTEF's Daylight Laboratory. They are all contaminated to order, but in different degrees.

The reason is that the dirt in question has been precisely applied. These plates will now be studied in detail by researchers in order to provide answers about how much the contamination occludes sunlight. This is the final phase of the project.

There really are all kinds of dirt. "The degree to which dust particles and contamination affects solar cells is very location-dependent," explains Ryningen.

At the start of the project she carried out a literature study to find out how such dirt affected its surroundings, only to find out that existing research focusing on air pollution and dust particles had for the most part been directed on the human body. However, she did find examples of research into the ways in which sand storms impact on solar cells installed in the Middle East. In other words, more research was needed in order to provide scientists with more details about this subject.

"We've seen that some dust particles absorb light while others reflect it," says Ryningen. "And small particles reflect more light than larger ones, whereas some scale contamination is biological and acts as a kind of 'sun factor'," she says. And some scale coatings are thicker than others.

However, what they all have in common is that they must be removed in order for the solar cells to function optimally according to specifications. For this reason, the researchers have developed a cleaning approach that is both fast and sensitive, as well as being environmentally-friendly. And which can deal with all the different types of contamination we encounter.

Cleaning is part of normal operations

The Norwegian company Scatec Solar constructs, owns, operates and maintains solar energy farms in many countries, including the Czech Republic, South Africa, Rwanda, Honduras and Jordan. Last year, the company's sites generated as much as 791 GWh. This is equivalent to the consumption of 200,000 average EU households.

Project Manager Caroline Sissener at Scatec Solar describes the Norwegian researchers' solution as interesting, especially for solar energy farms located in the Middle East.

"Cleaning is part of standard operational procedures at our solar energy farms, where equipment is cleaned at least once or twice a year on order to avoid soiling. This involves the removal of everything from sand to bird droppings ," she says. "But cleaning frequency is location-dependent. If a farm is located in a desert environment, the panels will require more frequent cleaning because the solar cells become covered with soil and sand," says Sissener.



She goes on to say that Scatec
solar often employs manual cleaning methods because these are effective and inexpensive, but that the company also uses automated systems.



"Cleaning robots may offer a relevant and attractive solution for solar energy parks located in areas where frequent cleaning is required," says Sissener.

She also informs us that manual methods are important to Scatec in some situations because they provide local jobs. The method chosen is assessed on a case-by-case basis, and environmental factors such as water shortages and neighbouring agricultural activity are also taken into account.

Robot arm and micro-showers

The robot cleaner currently in SINTEF's laboratory has undergone a range of tests. Researchers have experimented with a variety of micro cleaning pads, chemicals and air pressure application approaches -- all tested, of course, on different types of soiling.

"It is vitally important that we don't discharge chemical pollutants into the environment," explains Ryningen. "So we've rejected the use of traditional cleaning agents and have ended up using unbelievably small micro-droplets of water that are "sprayed" onto the glass, almost as a vapour. Then the robot uses a micro cleaning pad that effectively removes the contaminant particles.

Because solar cells can be exposed to wear and tear, researchers have also been working hard to develop methods of controlling the pressure exerted by the robot's cleaning arm.

"It is vital that the robot doesn't scratch the sensitive glass surface. Even small scratches can reduce the efficiency of the solar cells," explains Ryningen, adding that "in theory, this should work on windows as well, which will open up a broader market for us!," she says.

No comments:

Post a Comment

Foxnovo F08 Battery Charger

Why we like it: This reliable battery charger can charge up to 8 AA or AAA batteries, but also supports Li-ion, Ni-MH and Ni-CD batteries!...